HYDRANT VALVE 2019-11-05T11:52:41+00:00

Shilla Fire VALVE & CONNECTOR Product

HYDRANT VALVE

BALL VALVE for Hydrant

The supply valve is attached to the hydrant or firefighting water line for use on the fire hose.
Easy and quick Open/Close operation. There is no damage from foreign substances, and the valve shows excellent sealing effect even in poor environment. Drain valve can be mounted on the bottom to prevent damage from freezing.

Model Inlet Size Outlet Size Remarks Add to
quote
SL-41F-A NH2-1/2” (Female) NH2-1/2” (Male)
•Test Pressure : 2MPa
•Finishing : Red or Yellow
•Material : Aluminum
(option-Bronze, Ductile)
Add
SL-41Q-A NH2-1/2” (Female)(Female) Machino Quick2-1/2” (Male)
Add
SL-41FH-A 2-1/2” FLG for hydrant NH2-1/2” (Male)
Add
SL-41FQ-A 2-1/2” FLG for hydrant Machino Quick2-1/2” (Male)
Add
SL-48A-A FLG 2-1/2”, 3” NH2-1/2” (Male)
Add
SL-48MC-A FLG 2-1⁄2”, 3″ Machino Quick2-1/2” (Male)
Add

* Connector : BSQ , STORZ, NAKAJIMA, GOST

BALL VALVE for Hydrant (Bronze or Cast Iron)

Model Inlet Size Outlet Size Remarks Add to
quote
SL-41F NH2-1/2” (Female) NH2-1/2” (Male)
•Test Pressure : 2MPa
•Finishing : Red or Yellow
•Material
Body : Cast Iron or Bronze
Connector : AL or Bronze
Add
SL-41Q NH2-1/2” (Female) Machino Quick2-1/2” (Male)
Add
SL-41FH 2-1/2” FLG for hydrant NH2-1/2” (Male)
SL-41FQ 2-1/2” FLG for hydrant Machino Quick2-1/2” (Male)
Add
SL-48A FLG 2-1⁄2”, 3″ NH2-1/2” (Male)
SL-48MC FLG 2-1⁄2”, 3″ Machino Quick2-1/2” (Male)
Add

DIAPHRAGM VALVE

The diaphragm valve was designed exclusively for hydrants, and maximum water flow can be discharged on any conditions. The rubber seat enables complete blockage to prevent any damages from foreign substances.
The bronze body with excellent corrosion-resistance and EPDM material on diaphragm seat are applied.
The product can be used for industrial or marine use, and the basic specification is screw-type coupling,
but various types of couplings such as Machino Quick, BS Quick and Storz also are possible.

FE65(F) * FE65(M)

Inlet : FLANGE 2-1/2″, 3″
Outlet : NH(M), Machino Quick, BS Quick, Storz
Material : Bronze & EPDM Rubber
Working Pressure : 1.6MPa
Remark : Application for firefighting such as hydrant.
CE certified

Inlet : FLANGE 2-1/2″, 3″
Outlet : FE, NH, BSP, Machino Quick,
BS Quick, Storz, GOST
Material : Bronze & EPDM Rubber
Working Pressure : 1.6MPa
Remark : Application for firefighting such as hydrant.
CE certified

소화전에 부착모습

GLOBE VALVE for Hydrant

The valve is mounted on the hydrant to use fire hose, and the flow rate can be controlled conveniently. The advantage of the valve is enabling constant discharge pressure for safe use.

Model Inlet Size Remarks Add to
quote
SL-40G NH 2-1/2’’(F) * NH2-1/2”(M)
•Test Pressure : 2MPa
•Finishing : Red or Yellow
•Material : Bronze
Add
SL-40GF FLG 2-1/2” * NH 2-1/2’’(M) for hydrant
Add
SL-40GF-2 ANSI #150 2-1/2″ * NH 2-1/2″(M)
Add
SL-40GQ NH 2-1/2″(F) * MACHINO 65(M)
Add

GATE VALVE for Hydrant

The valve is installed on the fire water line such as hydrants to be connected with fire hose for use. There is no pressure loss and easy to use.
Various materials and connections are provided to enable to use according to
the site conditions.

Model Inlet Size Outlet Size Material Remarks Add to
quote
SL-40F NH2-1/2” (Female) NH2-1/2” (Male) •Body : Aluminum /
Bronze / Cast Iron
•Connector : Bronze /
Aluminum
•Test Pressure
: 2MPa
•Finishing : Red or Yellow
Add
SL-40Q NH2-1/2” (Female) Machino Quick2-1/2” (Male)
Add
SL-40FH 2-1/2” FLG for hydrant NH2-1/2” (Male)
Add
SL-40FQ 2-1/2” FLG for hydrant Machino Quick2-1/2” (Male)
SL-40FM FLG 2-1⁄2”, 3″ NH2-1/2”(M) / MQ2-1/2”(Male)
Add
SL-40GN For Hydrant, FLG 4” NH4”, NH4-1/2” (Male) Ductile & Bronze or AL
Add

GATE VALVE (UL LISTED)

The product is UL listed. Manufactured in bronze for excellent corrosion-resistance. The hose connector is NH thread.

Model Inlet Size Outlet Size Material Weight(kg) Remarks Add to
quote
SL-40F NH2-1/2”(Female) NH2-1/2”(Male) Bronze 8.2 •Test Pressure : 4MPa
•Option : Cap&Chain
UL Listed
Add
SL-40Q FLG2-1/2” for hydrant NH2-1/2”(Male) 9.8
Add

PRESSURE CONTROL VALVE

The pressure control valve is attached to the firefighting water supply line such as the hydrant. The irregular discharge pressure occurred due to various conditions in the fire site is controlled constantly under the set pressure to prevent any safety accidents from high pressure or irregular discharge pressure.

FE65(F) * FE65(M)

Size : Inlet-NH/PT&NPT/NH/BSP 2-1/2” FLANGE
Outlet – NH / MACHINO / BSQ / STORZ
Material : Bronze
Working Pressure : Inlet : MAX. 2.1MPa
Outlet : 0.35 ~ 0.8MPa
(Basic Setting : 0.7MPa)

LANDING VALVE

The landing valve is mounted on the indoor & outdoor hydrant. The discharge is designed to be the bending direction of the hose to maintain the smooth flow of the firefighting water. The Open/Close operation is convenient, and the material is in bronze for land and marine.

FE65(F) * FE65(M)

Size : Inlet-NH/PT&NPT/NH/BSP 2-1/2” FLANGE
Outlet-NH/NH/BSP/BSQ /STORZ MACHINO / GOST
Material : Bronze
Working Pressure : MAX 1.5MPa

INDOOR HYDRANT VALVE (Valve for Indoor Hydrant)

The valve is for Indoor Hydrant Box that is installed in building. The reducing valve controls the pressure from the high water pressure to normal pressure for effective firefighting operation.

Model Size Material Test
Pressure
Remarks Add to
quote
SL-39 PT1-1/2”(F) * NH1-1/2”(M) Bronze 2MPa
Add
SL-39A PT2-1/2”(F) * NH2-1/2”(M)
SL-39P NH1-1/2”(F) * NH1-1/2”(M) Bronze &
Aluminum
1.5MPa
->0.7MPa
Add
SL-39PA NH2-1/2”(F) * NH2-1/2”(M)
Auto Drip Valve PT 3⁄4” Brass
Add