HYDRANT BOX 2019-11-12T16:32:59+00:00

Shilla Fire HYDRANT & PIV Product

HYDRANT BOX

OUTDOOR HYDRANT BOX

It is installed outdoors of the firefighting target for the purpose of external firefighting and prevention of burning on nearby buildings. The upper part is installed with indicator light for showing the operation of the pressurized water supply device, and the lower part is stored with the firefighting equipment. (fire hose, nozzle, connector, wrench, etc.)

Size (mm) Material Remarks
A(가로) 700 ~ 1300 Stainless Steel
(1.5T or more)
or
Carbon Steel

(1.6T or more)
Door Area : 0.5m2 or more
Short-side area : 500mm or more
Internal Width : 180mm or more
Option : Materials such as
firefighting hose,
KFI certified
B(세로) 1200 ~ 1500
C(폭) 200 ~ 500
D(LEG) 300
E(상부도어폭) 150 ~ 250

INDOOR HYDRANT BOX

It is installed inside the building, and there is self standing type, wall mounting type.
The fire alarm system is installed on the top, and the bottom is stored with fire hose and nozzle to quickly extinguish the fire on emergencies.

Size (mm) Material Remarks
A(Length) 600 ~ 1000 Stainless Steel
(1.5T or more)
or
Carbon Steel

(1.6T or more)
Door Area : 0.5m2 or more
Short-side area : 500mm or more
Option : Materials such as firefighting
hose, KFI certified
B(Width) 1200 ~ 1500
C(Height) 180 ~ 300
D(LEG) 50 ~ 500

EMERGENCY FIRE BOX

The product is installed in locations difficult for quick firefighting or around the underground hydrant such as the residential area difficult for fire trucks to enter into traditional markets and high-altitude areas, and the purpose is to enable initial firefighting.
The box has fire hose, nozzle, fire extinguisher, wrench, and standpipe for supplying firefighting water from the underground hydrant, and wrench for Open/Close.

Size : 900(W) x 500(D) x 1500(H)
Material : Stainless Steel (1.5T or more) or Carbon Steel (1.6T or more)
Painting : Stainless Steel – Itself, Carbon Steel – Red
Content : Fire Hose(40A, 65A), Nozzle, Wrench,
Standpipe, Fire Extingusher, Connector

TEST VALVE BOX

The box is for inspecting the water pressure and valve operation for normal operation of the sprinkler facility.

Size : 300(W) x 200(D) x 500(H)
Content : Stainless Steel (1.5T or more)
or Carbon Steel (1.6T or more)

Application (Refer to the catalogue for detailed specifications.)